Features
- Ease of maintenance
- Fits in narrow areas along the dock
- Fits most pile configurations
- 33% Faster!
- Less Cable!
GatorVator™ Lift Design
allows us to manufacture a boat lift without the use of an upper structure and only two spools to wind the cable.
Golden GatorVator™ Lift Design
2,000#, 4,000#, 7,000#, 10,000# and 14,000# The 2,000# and 4,000# capacity lifts are a one motor,
3 piling lift setup with no upper beams.
The 7,000#, 10,000# and 14,000# capacity lifts are
2 motors and are either a 3 piling or a 4 piling configuration.
This is the best boat lift design for many
reasons: The GatorVator™ lift requires
only two drive spools. They are 3-1/2" diameter
and grooved for the longest cable life possible; the
cables never wrap over the top of each other. These
lifts have less cable than all other lifts with or without
top beams; no electric wires run under the water and
the lifting speed is 33% faster.
This design has eliminated the common objections of
the top beam of a lift being unsightly and boarding
a difficulty. This clean look and easy maintenance makes
it a sure winner. It is adaptable to boat houses, existing
pilings, and other structures. The GatorVator™
is user and installer friendly!
Golden GatorVator™ Boat Lift Warranty
10 year warranty on the structural parts, 25 years on
the drive system and 2 years on all other parts. |





For more Gatorvator™ boat lift photos, check our Gatorvator™ Photo Gallery. |